關注我們
搜索
PRODUCTS 產品中心?
WorkFit-A 雙顯示器型帶工作臺面
WorkFit-A 臺夾是轉角工作站的理想裝備，可用于多數表面的尾部或側邊，用戶在工作時可輕松自如地在坐姿和站姿之間變換。當用戶需要使用桌面時，可輕松收起鍵盤、擺動支臂和顯示器。
每當需要的時候，在坐姿和站姿之間變換自如。這款高度可調的工作站只需簡單操作即可調節鍵盤和顯示器高度，讓您長時間舒適地操作計算機將不再是神話。
WorkFit-A 臺夾是轉角工作站的理想裝備，可用于多數表面的尾部或側邊，用戶在工作時可輕松自如地在坐姿和站姿之間變換。當用戶需要使用桌面時，可輕松收起鍵盤、擺動支臂和顯示器。
每當需要的時候，在坐姿和站姿之間變換自如。這款高度可調的工作站只需簡單操作即可調節鍵盤和顯示器高度，讓您長時間舒適地操作計算機將不再是神話。
WorkFit-A 雙顯示器型帶工作臺面24-316-026
每當需要的時候，在坐姿和站姿之間變換自如。這款高度可調的工作站只需簡單操作即可調節鍵盤和顯示器高度，讓您長時間舒適地操作計算機將不再是神話。
好處
專為電腦用戶設計
- 按需坐站兩用自助工作站——在工作時自由選擇站姿或坐姿，節省精力，提高工作效率，并能隨心所欲變換位置。每天都站一會兒可以燃燒多余的熱量、強健肌肉、改變不良姿勢、加快血液流動并促進新陳代謝。
- 方便易用——安裝簡單、操作省力
- 可輕松并同步地將鍵盤和顯示器升高至最適合人體工學的高度
- 強大的承重能力能夠支持多臺顯示器，鍵盤，書籍，手機......您工作中需要的一切
- 當用戶需要使用桌面時，可輕松收起鍵盤、擺動支臂和顯示器。
- 所附帶的工作臺面可提供充足的空間，用戶能夠快速獲取平板電腦、手機、咖啡杯以及與工作相關的物品。
- 靈活的開放式構架設計滿足日后計算機設備擴展升級的需求
- 無需昂貴的專業安裝成本，僅需簡單地將 WorkFit-A 夾在現有的工作臺面上，即可改變現有的辦公或工作空間
- 布線安全整潔
- 在日常工作中加強身心健康來減少醫療費用支出
- 為員工提供站立式工作平臺，無需再購買昂貴的高度可調節的椅子。
- 投資在如何健康舒適地使用計算機上將帶來可觀的回報率--保健費用與不健康使用計算機緊密相關，健康使用電腦可提高生產力并將員工缺席時間減少。
- WorkFit 工作站幫助緩解背部及頸椎疼痛，根據2007年OE醫學日報，背部及頸椎疼痛被認為是影響雇員中最昂貴的支出
- 在辦公人機工程學中研究表明如給員工提供精心設計的家具，生產力將提升12%-18%
- Part Number: 24-316-026
- Description: WorkFit-A, Dual Monitor Sit-Stand Workstation, with Worksurface (polished aluminum/black)
- NOTE: Extra-long cables may be required to span between standing and sitting heights
- * Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. This range accommodates most displays with screens up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary slightly depending on display thickness. Note that older versions of this product used a narrower crossbar, which accommodated monitors with screens of up to 22"
- ? Weight Capacity: Maximum total load on height-adjustment assembly ≤ 25 lbs (11.3 kg). LCD weight = 4.5–10 lbs (2.0–4.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 2 lbs (.9 kg). For proper operation the total maximum weight when added together should not exceed 25 lbs (11.3 kg)
- ± Lift Range: LCDs and keyboard adjust 20" (51 cm) in tandem; LCDs adjust 5" (13 cm) independently
- Desk Clamp attaches to surface edge 0.78" to 2.6" (2 to 6.5 cm) thick
- NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment
- Arm extends up to 42" (107 cm) from back of desk and pushes back to within 18.25" (46 cm) when fully retracted
- Worksurface Dimensions: 22.63" x 9.75" (57.5 x 24.8 cm)
- Keyboard Tray Dimensions: 27" x 9.75" (68 x 24.8 cm)
- Keyboard tray can be installed in 3 different positions: centered, offset right or offset left
- Cable management routes and hides cords
- Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
- Can be configured to hold a laptop alongside a monitor: order Conversion Kit (97-617)
- ** A Washington State analysis of case studies related to office ergonomics showed a median productivity increase of 12% following an ergonomic intervention. New studies from the Office Ergonomics Research Committee (OERC) suggest that employees who are provided with well-designed ergonomic furniture and are trained to use it see an average productivity increase of 18%
- This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
- Shipping Dimensions: 37" x 21" x 11.5" (94 x 53 x 29 cm)
- Shipping Weight: 51 lbs (23.2 kg)
- Warranty: Five (5) years
產品分類??
熱門產品
