• 完美的 24” 顯示器雙支架解決方案
• 使用 50×50 mm 或 100×100 mm 穿孔模式連接各式支架
• 穩固設計可確保多年使用壽命
• 隱藏和整理電纜：顯示器電纜可整齊地排到顯示器后方

•  Part Number: 97-783
• Description: Dual Monitor & Handle Kit (black)
• Includes bow, two mounting brackets, handle, mounting hardware
• * Outside width of monitor should be 14" to 24.5" (35 to 62 cm). This range accommodates most 17" to 24" displays as well as some displays as large as 26". If the outside width is less than 14" (35 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5" (62 cm) are not compatible
• ? Combined weight of displays can be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5" (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5" (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity
• Attaches to mounts with four-hole interface of 50 x 50 mm or 100 x 100 mm
• Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• This kit can be installed and used without the included handle
• Product Dimensions: 4"H x 29.1"W x 1.5"D (10 x 74 x 38 cm)
• Shipping Dimensions: 31" x 13.5" x 7" (79 x 34 x 17.5 cm)
• Shipping Weight: 8.4 lbs (3.8 kg)
• Warranty: Five (5) years

說明書
尺寸圖示說明 DI    安裝手冊 IM